Automation & Servo Equipment Couplings
Automation equipment needs extra attention to backlash, positioning response and speed changes. Standard elastomeric jaw couplings are not automatically suitable for every servo or precision motion-control axis, so the motion requirement should be stated before an NM size is proposed.
Industry Background
Automation equipment needs extra attention to backlash, positioning response and speed changes. Standard elastomeric jaw couplings are not automatically suitable for every servo or precision motion-control axis, so the motion requirement should be stated before an NM size is proposed.
Main Challenges
Backlash acceptance, dynamic response, speed reversals and shaft fit are the dominant checks.
- Torque and transient load
- Driver and driven shaft dimensions
- Running speed and cycle pattern
- Alignment condition and bearing reaction
- Temperature, contamination and maintenance access
Our Solution Approach
Use the NM series as a reference when its bore, torque, speed and installation envelope fit the machine requirements. The first pass checks operating torque or motor power and speed, both shaft sizes, the duty cycle and environment. If the application needs behavior not supported by a standard elastomeric jaw arrangement, review another coupling family rather than forcing an NM selection.
Key Performance Requirements
| Input | Why It Matters |
|---|---|
| Torque / motor power | Sets the required coupling capacity after service margin. |
| Speed | Must stay within the approved limit for the selected size. |
| Shaft diameters | Determines whether the selected hub can be safely machined. |
| Duty and environment | Affects element, service margin, inspection and maintenance decisions. |
Recommended NM Models
Installation And Maintenance Tips
Keep shafts clean and burr-free, machine the bores and keyways to the approved drawing, align the shafts before fitting the flexible element, verify the final hub spacing, and inspect the element during planned maintenance. Investigate unusual heat, noise, dust generation or repeated element damage rather than simply replacing the wear component.
Application Scene
RFQ Inputs
Axis function, motor data, peak/continuous torque, shaft sizes, positioning requirement, speed profile and cycle rate.
💡 Hurtigbestillingspåminnelse Standarddeler har grunnleggende MOQ. Store varer av høy verdi er basert på total ordreverdi. 1‑5 stk. prøver er tilgjengelig for nye kunder til prøvepris. Bland modeller opp til USD 1500. Spesialbehandling er begrenset av prosessbatchstørrelse. Bestillinger på 1‑2 stk. kommer med høyere kostnader. Spesialprosjekter er velkomne for evaluering. For et effektivt tilbud, vennligst oppgi følgende i e-posten din: produktmodell, bransje, bruksområde og viktige spesifikasjoner.
