How To Choose An NM Coupling For An Air Compressor
Air compressor coupling selection starts with the drive data, not with coupling diameter. Confirm motor power and speed or transmitted torque, both shaft diameters, start/stop frequency, duty cycle and the environment around the drive.
Start With Torque And Speed
Use the motor power and operating speed to establish the steady torque, then account for the real start-up and transient behavior of the compressor. The selected coupling should be reviewed against the applicable normal and transient load basis rather than assuming that a “maximum” table value is a continuous rating.
Check Both Shaft Sizes
Compare the driver and driven shaft diameters with the candidate model bore range. A larger coupling may be necessary because of shaft size even when the torque is modest. Provide keyway details and any shoulder or hub-length limits.
Review The Environment
State temperature, oil exposure, contamination, ventilation and maintenance access. The exact flexible-element compound should be confirmed for the service environment rather than guessed from appearance.
Alignment And Installation
Align the shafts before installing the flexible element. Verify hub spacing and fastening, then inspect for abnormal noise, heat or repeated wear after commissioning.
Model Comparison
NM 128 Flexibele klauwkoppeling
Key Takeaways
- Torque, speed and both bores must all fit.
- Starting duty matters for compressor applications.
- Element specification depends on environment.
- Final bore/keyway work should follow the approved drawing.
💡Snelle bestelherinnering Standaardonderdelen hebben een minimale bestelhoeveelheid (MOQ). Grote artikelen met een hoge waarde worden berekend op basis van de totale orderwaarde. 1-5 stuks samples zijn beschikbaar voor nieuwe klanten tegen sampleprijs. Mix-and-match modellen tot een waarde van USD 1.500. Speciale bewerkingen zijn beperkt door de batchgrootte. Bestellingen van 1-2 stuks hebben hogere kosten. Projecten op maat zijn welkom voor beoordeling. Voor een efficiënte offerte verzoeken wij u in uw e-mail te vermelden: productmodel, branche, toepassing en belangrijkste specificaties.
