How To Choose An NM Coupling For An Air Compressor
Air compressor coupling selection starts with the drive data, not with coupling diameter. Confirm motor power and speed or transmitted torque, both shaft diameters, start/stop frequency, duty cycle and the environment around the drive.
Start With Torque And Speed
Use the motor power and operating speed to establish the steady torque, then account for the real start-up and transient behavior of the compressor. The selected coupling should be reviewed against the applicable normal and transient load basis rather than assuming that a “maximum” table value is a continuous rating.
Check Both Shaft Sizes
Compare the driver and driven shaft diameters with the candidate model bore range. A larger coupling may be necessary because of shaft size even when the torque is modest. Provide keyway details and any shoulder or hub-length limits.
Review The Environment
State temperature, oil exposure, contamination, ventilation and maintenance access. The exact flexible-element compound should be confirmed for the service environment rather than guessed from appearance.
Alignment And Installation
Align the shafts before installing the flexible element. Verify hub spacing and fastening, then inspect for abnormal noise, heat or repeated wear after commissioning.
Model Comparison
Key Takeaways
- Torque, speed and both bores must all fit.
- Starting duty matters for compressor applications.
- Element specification depends on environment.
- Final bore/keyway work should follow the approved drawing.
💡クイックオーダーリマインダー 標準部品には最低発注数量（MOQ）が設定されています。高額大型商品は、注文総額に基づいて価格が決定されます。新規のお客様には、サンプル価格で1～5個のサンプルをご提供いたします。モデルの組み合わせにより、合計金額は1,500米ドルに達します。特殊加工は、加工バッチサイズによって制限されます。1～2個のご注文は、コストが高くなります。特別なプロジェクトも評価のために歓迎いたします。効率的な見積もりのために、メールに製品モデル、業界、用途、主要仕様を明記してください。
